How to use the electric hot pot Cleaning and maintenance of the electric hot pot

How to use the electric hot pot Cleaning and maintenance of the electric hot pot

How to use the electric hot pot

The two ends of the power cord should be properly connected according to regulations, and if there is a thermostat device, the switch should be placed in the middle or at the required position. Usually, it is put on the “high temperature” file at the beginning, and after the water is boiled, it can be put on the “keep warm” file.

Non-thermostatic type should pay attention to the temperature rise of the pot, let alone dry the pot. If you need to remove the water in the pot, you should cut off the power first and let it cool down before releasing the water in the pot. Because although the power is off, the temperature of the bottom of the pan is still very high, which may burn the bottom of the pan.

Do not touch the hot pot with wet hands, let alone touch the hot pot with one hand and the faucet with the other. In case of leakage, there is a danger of electrocution.

The hot pot and the plug should be kept clean. After each use, they should be washed and wiped dry with a dry cloth to avoid greasy dirt. If there is greasy dirt, it can be wiped clean with detergent. Do not put the electric hot pot into water for cleaning, otherwise, the water will be immersed in the interior, resulting in an electric leakage accident.

Cleaning and maintenance of electric hot pot

The power of the electric hot pot is generally large, and the socket and power cord used should match the power consumed to avoid accidents.

The electric hot pot uses a single-phase three-core textile flexible wire as the power lead. When connecting, first insert the plug at the end of the power lead with a jack into the electric heating socket of the pot body, and then put the switch of the thermostat in the middle or proper position. Usually, it is placed on the high temperature file at the beginning, and after the water is boiled, it can be placed on the heat preservation block. Be careful to have a good grounding.

For non-thermostatic electric hot pots, do not dry the heating element and the pot body. When it is necessary to remove the water in the pot, the power supply should be cut off and cooled down for a while before releasing the soup water in the pot, so as to prevent the residual heat of the porcelain plate at the bottom of the pot from burning the bottom of the pot.

When using, do not touch the electric hot pot with wet hands, and do not touch the electric hot pot with one hand and the faucet with the other hand to prevent the pot body from leaking electricity and hurting people.

Always keep the electric hot pot clean and hygienic. After each use, the electric hot pot should be cleaned after cutting off the power supply. When cleaning, be careful not to let water seep into the pot body. It is best to use a dry cloth to clean the electric heating socket and other places. , the place of debris. The surface of the pot body should also be wiped economically to keep it clean to avoid oxidation.

After the pot body of the electric hot pot has patina, continued use may cause food poisoning. You can use a cloth dipped in vinegar and add a little salt to wipe the patina body, so as to remove the patina.

A hot pot that has been heated cannot be moved until it cools down.

For split-type electric hot pots, attention should be paid to maintaining the shape of the bottom of the pot to prevent deformation from affecting thermal efficiency and service life.

The electric heating element of the electric hot pot has thermal inertia, and the food should be poured into cold water to cool down immediately after eating, otherwise the pot will be empty.